32
Storage, maintenance and cleaning
• Before all rides, check that all connecting elements, screws
or self-locking fasteners and quick releases have been tight-
ened.
• Check the brake adjustment (as described on page 9).
• Check tyre pressure regularly and ll the tyres with air as
needed. Note the values marked on the tyres (bar/psi).
• No part of the scooter may be deformed, cracked or broken.
Defective, worn or missing parts must be replaced before
use.
• Use only a soft, damp cloth to thoroughly clean the scooter.
• Allow the scooter to dry completely before use or storage.
• Do not store your scooter outdoors.
• Store your scooter in a dry place which is protected from the
sun.
• Exposing the kick scooter to direct sunlight or hot or cold
conditions for extended periods of time may accelerate ma-
terial ageing.
NOTE!
• Never use alcohol, benzine, acetone or other caustic and
volatile chemical solvents which are corrosive to surfaces.
These substances can damage the scooter's appearance as
well as its exterior or interior structure.
• Never clean the scooter using strong jets of water or high-
pressure cleaners.
To Next Page
Loading...
