UV (Ultraviolet) detection function
The UV detection function is selected or deselected by pressing the
CF button in the function console. The UV function is able to check
all types of banknotes which contain UV features.
MG (Magnetic) detection function
The MG detection function is selected or deselected by pressing the
CF button in the function console. The MG function is able to check
all types of banknotes which contain MG features.
IR (Infrared) detection function
IR detection function is selected or deselected by pressing the IR
button in the function console. The IR detection is used to detect
double-note.
DD detection function
The DD detection function is selected or deselected by pressing the
DD button in the function console. The DD detection is used to detect
the banknote with different width.
Total value calculation function
Total value calculation function is selected or deselected by pressing
the VAL button in the function console. Keep pressing VAL button
for 3 seconds to exit this function.
Through this function, the user need press VAL button to choose
denomination manually. Under calculation function, the user can turn
on ADD function if want to count many denominations, so user can
press VAL button to choose denomination accordingly and the total
value will not clear.
In this case, the next banknotes placed in the hopper will be counted
and added to the previous total value.
DoCash 3040 series 9 www.docash.de
To Next Page
Loading...
