Need help?Do you have a question about the DOD carcosa fuzz and is the answer not in the manual?
General| Type | Fuzz |
|---|---|
| Bypass | True bypass |
| Controls | Fuzz |
| Power Supply | 9V DC |
| Dimensions | 4.68" x 2.63" x 2.25" |
| Output Impedance | 10 kΩ |
| Enclosure | Metal |
Increases or decreases the amount of fuzz effect.
Adjusts the overall output level, serving as a boost.
Changes fuzz texture from clean 'woody' to splatty 'horn-like' sounds.
Reduces high-frequency content for brighter or darker tones.
IN connects the instrument; OUT connects to the next pedal or amplifier.
Selects bass boost (DEMHE) or bass cut (HALI) for different amp voicings.
Footswitch turns effect on/off; LED indicates active status.
Illustrates the effects of AFTER (Bias) and HI-CUT controls on tone and gain.
Discusses how amp type and control settings influence fuzz voicings.
Advises placing the pedal at the front of the effects chain for optimal tone.
Lists input/output impedance, current draw, bypass type, power, and warranty.
To Next Page
