DOD TEC8 User Manual

Distortion
1-10 IT
11-20 Grind
Low EQ
1-8 Gate Threshold
9-11 Fast Swell
12-14 Slow Swell
Noise Gate Mid EQ
12 dB Boost -2 dB Cut
10 dB Boost -4 dB Cut
8 dB Boost -6 dB Cut
12 dB Boost -2 dB Cut
10 dB Boost -4 dB Cut
8 dB Boost -6 dB Cut
12 dB Boost -2 dB Cut
10 dB Boost -4 dB Cut

High EQ
8 dB Boost -6 dB Cut
Compressor
1-10 Comp Amount
1 Volume
2 Wah
3 Auto Wah
Expression
Multi Delay
1-3 Room
4-6 Hall
7-9 Arena
Master Level
1-4 Chorus Slow
5-8 Chorus Medium
9-12 Chorus Fast
13-16 Flange Slow
17-20 Flange Medium
21-24 Flange Fast
Chorus/Flange
1-4 Phase Slow
5-8 Phase Medium
9-12 Phase Fast
13-21 Tremolo
22-28 Ring Modulator
29-40 Pixellator
1 Octabass
Pitch/Detune
4 6th
2 Oct
1-9 Pong 100/200ms
11-19 Pong 150/300ms
21-29 Pong 200/400ms
31-39 Pong 250/500ms
41-49 Taps 100/300ms
51-59 Taps 200/300ms
61-69 Taps 300/400ms
1-9 100ms
11-19 200ms
21-29 250ms
31-39 300ms
41-49 350ms
51-59 400ms
61-69 500ms
0-99 Level
Reverb
Pha/Tre/More
3 6th
6 4th
5 5th
6 dB Boost -8 dB Cut
4 dB Boost -10 dB Cut
2 dB Boost -12 dB Cut
0 Flat
6 dB Boost -8 dB Cut
4 dB Boost -10 dB Cut
2 dB Boost -12 dB Cut
0 Flat



6 dB Boost -8 dB Cut
4 dB Boost -10 dB Cut
2 dB Boost -12 dB Cut
0 Flat
Mono Delay
4 Mod Speed
5 Mod Depth
6 Mod Level
7 Detune
8 Pitch/Detune Level
9 Delay Level
10 Reverb Level
Data
71-79 Taps 400/500ms
21-30 Fuzz
31-40 FuzzIT
7 3rd
bb
b
8 3rd
9 4th
10 5th
11 Oct
12-14 5 Cents
15-17 10 Cents
18-20 15 Cents
41-50 IT (Spkr Sim)
51-60 Grind (Spkr Sim)
61-70 Fuzz (Spkr Sim)
71-80 Fuzz IT (Spkr Sim)
PGM#BANK
23
Owner’s Guide
Harman Music Group Inc.
Introduction
Welcome to the world of the DOD TEC8! You have purchased the finest
guitar signal processor and preamp of its kind; hardly a surprise when it
comes from DOD. The TEC8 gives you both functional flexibility and tonal
excellence, driven by our proven effects processing technology.
Specifications
Up to 8 effects at a time
Ergonomic look and feel
Built-in effect Expression Pedal
Analog IT™ and Grind Distortions
3-band EQ
Effects include: Compressor, 8 Analog Distortions, Noise Gate, Chorus,
Flanger, Phaser, Tremolo, Ring Modulator, Pixellator, Pitch, Shift, Detune,
Mono and Tap Delays, Reverb
Easy-to-use interface
30 User, 30 Factory Presets
Jam-a-long™ Jack
A/D Resolution: 18 Bit
D/A Resolution: 16 Bit
DSP: 24 bit
Frequency Response: 20Hz to 16kHz
Signal to Noise Ratio: -87dB
Power Supply: DOD PS750, 9 VAC @ 750 ma

DOD TEC8 Specifications

General

Brand	DOD
Model	TEC8
Category	Music Pedal
Language	English

Summary

Important Safety Precautions for the DOD TEC8

Water and Moisture Precautions

Advises against using the appliance near water or exposing it to liquids.

Power Source and Grounding Guidelines

Specifies correct power supply connection and grounding importance.

Power Cord Protection and Servicing

Guidance on routing power cords and limits on user servicing.

Fuse Replacement Instructions

Details on replacing the fuse with the correct type.

DOD TEC8 Front Panel Controls Continued

Expression Pedal and Assignment

Controls selected parameters and assigns effects to the pedal.

DOD TEC8 Hooking Up and Powering

Connecting Stereo and Mono Outputs

Instructions for connecting to amplifiers or mixing consoles.

Connecting Instrument and Power Supply

Steps for connecting your instrument and powering on the unit.

Setting the Input Level

Guide to setting the input knob using the Clip LED indicator.

Power Protection and Interference Avoidance

Tips to protect the unit from voltage fluctuations and interference.

Navigating the DOD TEC8 Programs

Selecting and Bypassing Effect Groups

Using Effect Selector buttons to choose or bypass effect groups.

Using Footswitches for Navigation

Details on the four footswitches for bank and program selection.

Selecting Programs Using Footswitches

Bank and Program Selection via Footswitches

Step-by-step guide to selecting banks and programs with footswitches.

Editing DOD TEC8 Programs

Modifying Program Settings Example

Example of changing delay time, feedback, and level in a program.

Adjusting Mono Delay Settings

Delay Feedback and Level Adjustments

How to adjust delay feedback (repeats) and level using the Data wheel.

DOD TEC8 Expression Pedal Assignment

Assigning Pedal Control to Parameters

Expression Assignment to Effect Controls

Storing Custom Programs in DOD TEC8

Saving Modified Programs to Memory

DOD TEC8 Tuner Functionality

Accessing the Tuner

Tuner LED Indicators Explained

Tuner Reference and Factory Reset

Changing Tuning Reference

Factory Program Reset Procedure

Steps to erase user programs and restore factory settings.