Need help?Do you have a question about the DOD FX75B Stereo Flanger and is the answer not in the manual?
Instructions for opening the battery compartment cover by pushing the tab.
Guidance on removing the old battery and inserting a new 9-volt battery.
Steps to close the battery compartment cover securely.
Enables stereo output for compatible setups.
Provides 'clickless' signal path insertion.
Shows effect status and battery condition.
Allows for tool-free battery access.
Provides an option for AC power operation.
Adjusts delay time in conjunction with WIDTH and SPEED.
Adjusts delay variation rate from 0.8 to 8 cycles per second.
Sets total delay time variation for sweep depth.
Adjusts comb filter peak height via feedback.
Engages or disengages the flange effect.
Illuminates when the effect is active.
Includes INPUT, OUTPUT 1, OUTPUT 2, and AC ADAPTER jacks.
Provides example settings for tremolo, thick flange, tubular sound, and computer voice.
Offers sample settings for tremolo, slow flanging, and thick flange sounds.
General| Type | Stereo Flanger |
|---|---|
| Technology | Analog |
| Input Impedance | 500 kOhms |
| Output Impedance | 1 kOhms |
| Power Supply | 9V DC |
| Battery | 9V battery |
| Outputs | 2 x 1/4" (Stereo) |
| Controls | Speed, Width, Regen |
To Next Page
