Installation and Fixation
Software Operation
Notes
System Settings
Recording Settings
Video Playback
Video-Play Operation
1.After stopped recording, press MODE to enter the video-play
mode.
2.Press UP or Down to select the desired video to play.
3.Press CONFIRM to start playing video.
4. Press CONFIRM again to pause the video.
Delete Video
1.After stopped recording, press MODE to enter the video-play
mode.
2.Press UP or Down to select the desired video to delete.
3.Press MENU, enter the menu to delete the video or delete all.
Play on Computer
It is recommended to play the video by free software VLC PLAYER.
Please go to to download and install
VLC Player.
Recommended PC requirements for 1080P 30fps video playing:
1.intel Core 2 Duo 2.0GHz or above CPU
2.2G or above DDRII RAM
3.Graphic card supports DirectX 10 or above
http://www.videolan.org/vlc/
After stopped recording, press MENU to enter the recording
settings.
Resolution Set the recording resolution.
Record Cycle Set the video length in recording cycle mode, or
toggle off record cycle function.
WDR：Toggle on the WDR function.
：
：
Power On/Off
Product Structure
Switch On
1.Please insert the memory card into the SD Card Slot with the
specified direction, and then use the bracket to install the device
inside the car.
2.When using the bracket, please choose the position carefully. Do
not place the device in the position that blocks the driver's sight
or affects the work of the airbags.
3.If there is any splotch, fingerprints or other kinds of smudginess
on the windshield, please wipe clean it before installing.
Please connect the vehicle cigarette lighter and start the engine, the
device will be switched on immediately.
When car engine stooped or car power disconnected, the device will
shutdown in 10 seconds automatically.
1.For the users whose vehicle cigarette lighter keeps power
supplying after the engine stopped, please unplug the car
charger before leaving the vehicle.
2.Please use Class 6 or above Micro SD card
1.Insert the memory card
2.Connect the car charger into the vehicle
cigarette lighter and the device
3.Start the vehicle.
4.The device be turned on, and start
recording automatically.
EV：Set the exposure value.
Motion Detection：Toggle on or off the motion detection recording
function.
Sound Recording：Toggle on or off the sound recording function.
Date Stamp：Toggle on or off the data stamp function.
G-sensor：Set the sensitivity level of the G-sensor file protection .
Recording image
Standby Image
Hardware Installation Guide
Thank you for purchasing Our company product,
please following the instruction to use the device
correctly.
Our company products are made of top materials to
provide the best quality product with the best image
quality to all customers.
Recording notes
1. Recording in a car without film on windshield can ensure the
best image recorded.
2. Please keep the windshield clean to prevent bad influence
on image quality.
3. If windshield wiper can't clean the windshield, please
replace it with a new one, or the image quality in the rainy
day will be influenced.
4. Image quality will be better while recording in a sunny day, but
please note in backlight position the image will be darker, it's
the normal reaction while image sensor face the light straightly.
1 2 3
13
8
6
7
9
10
11
12
3.WDR works all time
5.Recording time
4.SOS file locking
7.Exposure compensation
6.Cycle recording in 3 minutes length
8.Resolution
2.Recording image
1.Recording mode
9.Memory Card icon
10.Date
11.Time
13.Available recording
length of SD card
12.Power connected
4
5
After stopped recording, press MENU twice to enter the system
setup.
Date/Time the system time.
LCD screen protection：Set the screen automatic off
time, or set it as always on.
LED light： Switch on or off LED light function.
Beep：Switch on or off the system beep indicator.
Language：Support multiple languages; you can choose the
language according to your preferences.
TV Mode：You can toggle between NTSC and PAL when in video
output mode.
Frequency： Support 50Hz and 60Hz.
Format： Format the memory card; please backup your data
before formatting.
Default Setting：Reset all the settings to the default state.
Version： Check the system version number.
：Set
To Next Page
Need help?
General
