Need help?Do you have a question about the DOD LS500W and is the answer not in the manual?
General| Max Frame Rate | 30 fps |
|---|---|
| GPS | Yes |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Wi-Fi | No |
| Video Resolution | 1920x1080 |
| Field of View | 150 degrees |
| Display | 2.7-inch LCD |
| Storage | MicroSD card up to 128GB |
| Battery | Built-in rechargeable battery |
Features a new SONY STARVIS CMOS sensor with improved sensitivity in low and near infrared light conditions.
Records front and rear views in 1080p FULL HD with wide viewing angles for optimal coverage and clarity.
Updates GPS data 10 times per second for accurate speed and location recording, synchronizing date and time automatically.
Provides well-balanced exposure for any lighting condition, enhancing night shots and preventing overexposure.
Records continually or locks files upon detecting unusual shock or motion when parked.
Captures images with an ultra-wide field of view up to 145 degrees without distortion.
Features an f/1.6 aperture for superior low-light performance, capturing detailed images at night.
Automatically locks current video files upon impact or emergency braking to prevent overwriting.
General safety guidelines regarding product handling, repair, exposure, water, and installation placement.
Precautions for using the car power adapter, including using only the supplied adapter and avoiding damaged cords.
Guidelines for keeping the device away from heat, storing at lower temperatures, and charging procedures.
Provides constant power source and prevents battery drain with low-voltage protection.
Identifies key buttons and ports on both LS500W and LS500W+ models for operation.
Describes the function of arrow keys for navigation and the SOS button for file protection.
Details the functions of Menu, OK/REC, and MIC/Display OFF buttons for camera operation.
Instructions for formatting and inserting the microSD card into the camera for initial use.
Guides on plugging the DOD power adapter into the vehicle's power outlet.
Steps to configure language, time zone, and speed units upon first use or after firmware upgrade.
Dash cam automatically turns on and records when receiving power.
Camera continues to record when vehicle is off if outlet provides constant power.
The camera defaults to video recording upon power-on.
Allows users to watch previously recorded videos.
Instructions for choosing, deleting, or protecting current files from the SD card.
Accesses video recording related settings like resolution, loop recording, and exposure.
Accesses system-wide settings such as date/time, volume, and display options.
Configure video resolution for front and rear cameras.
Adjust G-sensor sensitivity to detect impacts and lock files automatically.
Enable and configure automatic recording based on motion or impact detection when parked.
Configure audible and visual alerts for approaching speed cameras.
Completely deletes all files from the SD card and optimizes it for recording.
Reverts all settings back to the original factory default.
Allows simultaneous viewing of front and rear camera footage.
To Next Page
