22
Camera Settings
Each mode has a unique set of settings. See the description below.
Two Camera Settings menus are accessible:
System Settings
The menu settings can be switched by pressing【 】.
If you move the cursor before pressing【 】to access to system menu, exit and try again.
Note: Press【 】to stop recording before entering the camera menus.
Video Recording: Functional Settings Page
Accessed by pressing【 】once.
Resolution
Default with dual camera in 1080p Full HD at 30fps. Optional only for the front camera
1080p Full HD at 60fps, which will disable rear camera and records front video only.
Recommended setting: FHD 30fps X 2.
Loop Recording
Can be set to 1,3,5 or 10 minutes. Video recordings of the selected length will be recorded
onto the memory card. When the memory card is full, the oldest files will be overwritten,
excluding locked clips. Turning off loop recording will result in 30min per video and will
prevent the camera from writing new files when the memory card is filled.
Exposure Value (FRONT / REAR)
Sets the brightness /darkness of the video of each camera.
Video too bright? Set between -1 to -3.
Video too dark? +1 to +3.
Recommended setting: 0
Record Audio
Switches the microphone recording on/off.
Options can be changed during recording by pressing button【 】.
Date Stamp
Imprints the time and date in the recorded video.
To Next Page
Loading...
