G-Sensor
Measures G-forces. The sensitivity settings can be set off/low/mid/high, If excessive force
is detected, the current recording video will be locked and the file will be saved in the “RO”
directory. However, Setting G-Sensor to OFF may result in faulty function in Parking
Surveillance Mode.
Recommended setting: low. Inappropriate setting per environment or road condition will
result in frequently file lock.
Parking Surveillance (Default: Off)
When function is enabled, the Dash Cam will automatically switch to Parking Surveillance
Mode if vehicle is stationary for over 10 minutes.
1. Automatically records videos (both front and rear) when motion is detected within view
range of front or rear camera.
2. Automatically records and locks recording videos (both front and rear) when excessive
force of impact is detected by G-sensor.
3. Camera only records when motion or impact is detected.
4. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or
longer.
Note:
Parking Surveillance requires consistent power supply via vehicle battery.
(It is recommended to use optional DOD DP4 kit equipped with low-voltage
protection design to prevent battery drainage.
Please ensure to enable G-sensor function in setting menu before switch to
Parking Surveillance. (G-sensor sensitivity Default: Medium)
Parking Surveillance will automatically shut down GPS locating, and will
resume when switched to normal recording mode.
Enabling Parking Surveillance will automatically shut down Time-Lapse
function if previously turned on.
Back lighting will automatically dim when entering Parking Surveillance,
To Next Page
Loading...
