DOD VoTec - Quick Start Guide; Initial Safety and Connection Steps; Power and Input Level Setup; Accessing Banks and Presets

1.
Banks/Presets:
The left 3
footswitches pro-
vide access to
presets.
The far right
footswitch scrolls
up through
banks.
Safety Info:
Read all safety
instructions
before operating
VoTEC
Input
Connection:
Insert XLR cable
from microphone
to VoTEC input.
QUICKK SSTTARTT
Input Level:
Set your Input
level to 12 o’
clock, with the
Input Knob.
Power:
Make sure DOD
PS200R adaptor
is connected.
Output
Connection:
Insert XLR cable
from VoTEC out-
put to mixer input
4.
2.
5.
CAUTION
ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PS200R
D.C. IN
3.
input
output