133
Controls in detail
Tempmatic
3
1 Airflow control
To increase: press the Q airflow
control.
To reduce: press the airflow
control.
The display next to the airflow controls
indicates the speed of the airflow.
The air distribution is set using the air dis-
tribution control in the control panel
( page 131).
The markings on the air distribution control
have the following meanings:
You can switch off the flow of outside air if
unpleasant odors are entering the vehicle
from outside, e.g. before driving through a
tunnel. No more outside air is taken in and
the air inside the vehicle is recirculated.
The switch for air-recirculation mode is in
the control panel ( page 131).
To switch on: press the Ä switch.
The indicator lamp in the switch comes
on.
Setting the airflow
i
The blower switches off if you press the
ß airflow control again after the slowest
speed has been reached.
N83.00-2125-31
Setting the air distribution
Mark Meaning
h Air from the air vents
ÔP Air to the windshield
Air from the air vents
Ò Air to the windshield
Air from the air vents
Air to the footwell
Ó Air from the air vents
Air to the footwell
Air-recirculation mode
Warning G
Only switch over to air-recirculation mode
briefly if outside temperatures are low. The
windows could otherwise fog up. As a result,
you could be distracted from road and traffic
conditions and cause an accident.
To Next Page
Loading...
