141
Controls in detail
Auxiliary heating/ventilation*
3
Operation using the remote control*
The remote control has a maximum range
of approximately 600 meters. The range
may be reduced by:
sources of interference
solid objects between the remote con-
trol and the vehicle
the remote control being in an unfavor-
able position
transmitting from an enclosed space
You can use up to 4 remote control units
on the vehicle.
1 Indicator lamp
2 To switch the auxiliary heating on
3 To switch the auxiliary heating off
To switch the auxiliary heating on:
press button 2.
Indicator lamp 1 lights up briefly.
To switch the auxiliary heating off:
press button 3.
Indicator lamp 1 lights up briefly.
The auxiliary heating operates for
around a further 2 minutes and then
switches off automatically.
Synchronizing the remote control
Press and hold the ö switch for
more than 10 seconds:
The red indicator lamp in the ö
switch remains lit until it is released.
Afterward, the red indicator lamp in
the ö switch flashes. The system is
activated for synchronizing.
Press button 2 on the remote control.
The indicator lamp in the ö switch
stops flashing and goes out. The re-
mote control and the control panel are
synchronized.
i
Change the batteries immediately if in-
dicator lamp 1 does not light up brief-
ly each time a button is pressed
( page 316).
i
If you press button 3 on the remote
control during the first 3 seconds of
synchronization process, only this re-
mote control will be synchronized with
the clock.
Any other remote control units that
were synchronized will be cleared.
To Next Page
Loading...
