142
Controls in detail
Auxiliary heating/ventilation*
3
Selecting a switch-on time
You can use the operating system to define
up to 3 switch-on times, one of which can
be selected to switch on the auxiliary
heating/ventilation.
Operating system without steering
wheel buttons
Switch on the ignition ( page 67).
Press the ö switch.
The ö symbol in the display flashes.
or
Press the menu button on the in-
strument cluster repeatedly until the
ö symbol in the display flashes.
Use the or button on the instru-
ment cluster to select desired switch-
on time
1
to
3
.
The switch-on time selected is dis-
played.
Wait 10 seconds for the standard dis-
play to appear.
The switch-on time is selected.
The yellow indicator lamp in the ö
switch comes on.
If you have not selected a switch-on time
and
--:--
appears in the display, the auto-
matic switch-on is deactivated. The yellow
indicator lamp in the ö switch goes
out.
Operating system with steering wheel
buttons*
Switch on the ignition ( page 67).
Briefly press the ö switch.
The
Aux. heat.
submenu is shown in
the display.
The selected switch-on time is high-
lighted or
Timer off
is highlighted if no
switch-on time has been selected.
Press the æ or ç button to se-
lect the desired switch-on time. The au-
tomatic switch-on is deactivated if the
Timer off
setting is selected.
i
If you turn the key to position 0 in the
ignition lock, the yellow indicator lamp
in the ö switch goes out after
30 minutes.
The red indicator lamp in the ö
switch comes on when the auxiliary
heating switches on.
i
You can reach the
Aux. heat.
submenu
via the
Settings
menu ( page 96).
N54.32-2277-31
To Next Page
Loading...
