143
Controls in detail
Auxiliary heating/ventilation*
3
Press the è button.
The switch-on time is selected.
The yellow indicator lamp in the ö
switch comes on.
Setting the switch-on time
Operating system without steering
wheel buttons
Select a switch-on time as described
under “Selecting a switch-on time”
( page 142).
Press the reset button on the instru-
ment cluster to set the selected switch-
on time.
The hours figure flashes and the ”
symbol appears in the display.
Set the hours using the or am
button on the instrument cluster.
Press the reset button.
The minute display flashes.
Set the minutes using the or
button.
Operating system with steering wheel
buttons
Select a switch-on time as described
under “Selecting a switch-on time”
( page 142).
Press the j button.
The
Hours
menu appears in the display.
Set the hours using the æ or ç
button.
Press the j button.
The
Minutes
menu appears in the dis-
play.
Set the minutes using the æ
or ç button.
Press the è button.
The switch-on time is set and selected.
i
If you turn the key to position 0 in the
ignition lock, the yellow indicator lamp
in the ö switch goes out after
30 minutes.
The red indicator lamp in the ö
switch comes on when the auxiliary
heating switches on.
i
If you keep the button pressed, the val-
ues will change continuously.
To return to the standard display:
press and hold the button on
the instrument cluster for more
than 1 second
do not press a button for
10 seconds
i
To return to the standard display, press
the è or ÿ button repeatedly
until the standard display appears.
To Next Page
Loading...
