58
Controls in detail
Opening and closing
3
Sliding door switch in the doorway
3 To open/close the sliding door
To open the sliding door: briefly press
lower part 2 of the switch on the cen-
ter console.
The indicator lamp in the switch flash-
es. The sliding door unlocks and opens,
and a signal sounds.
or
Briefly press switch 3 in the doorway.
The sliding door unlocks.
Briefly press switch 3 in the doorway
again.
The indicator lamp in the switch flash-
es. The sliding door opens and a signal
sounds.
To close the sliding door: briefly
press upper part 1 of the switch on
the center console or briefly press
switch 3 in the doorway.
The indicator lamp in the switch flash-
es. The sliding door closes and a signal
sounds.
Press lower/upper part of the switch
on the center console or press
switch 3 in the doorway.
The sliding door stops.
To lock the sliding door from inside:
press the locking knob of the sliding
door down ( page 56).
Proceed as follows in the event of unfavor-
able operating conditions, e.g. frost, ice or
heavy soiling:
To open the sliding door: press lower
part 2 of the switch on the center con-
sole or press and hold switch 3 in the
doorway.
The indicator lamp in the switch flash-
es. The sliding door unlocks and opens,
and a signal sounds.
To close the sliding door: press upper
part 1 of the switch on the center con-
sole or press and hold switch 3 in the
doorway.
The indicator lamp in the switch flash-
es. The sliding door closes and a signal
sounds.
Release the switch.
The sliding door stops.
i
On vehicles with a partition, the switch
is located on the partition near the
doorway level with the inside door han-
dle.
N72.16-2119-31
i
The indicator lamp in the switch on the
center console lights up whenever the
sliding door is open.
To Next Page
Loading...
