96
Controls in detail
Operating system with steering wheel buttons*
3
The
Settings
menu has two functions:
the
To reset: Press reset button for
3 sec.
function, with which you can re-
set all settings to the factory defaults
a collection of submenus which you
can use to make individual settings for
your vehicle
Press the è or ÿ button repeat-
edly until you see the
Settings
menu in
the display.
Settings menu
Resetting settings
You can reset the functions in all sub-
menus to the factory defaults.
Press the reset button for approxi-
mately 3 seconds.
You will see the message in the display
prompting you to press the reset
button once more to confirm.
Press 0 reset button again.
The functions in most submenus are re-
set to the factory defaults.
Settings menu
N54.32-2254-31
Function Page
Reset settings 96
Reset the functions of a sub-
menu
97
Submenus in the Settings menu 97
Instrument cluster submenu 99
Clock/Date submenu 101
Lighting submenu 102
Vehicle submenu 104
Auxiliary heating* submenu 142
Convenience* submenu 105
i
If you do not press the reset button
a second time to confirm, the changed
settings remain set. The
Settings
menu is displayed again after approxi-
mately 5 seconds.
For safety reasons, it is not possible to
reset all of the functions while the vehi-
cle is in motion. For example, the
Hdlmp. mode
function in the
Lighting
submenu remains unchanged.
To Next Page
Loading...
