Using The EVIC Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the DOWN
arrow button to
scroll downward through the main menu to “Ve-
hicle Info”.
• Push and release the RIGHT
arrow button to
access the ”Oil Life” screen.
•
Push and hold the RIGHT
arrow button to reset the
gauge and numeric display to 100% for ”Oil Life.”
• Push and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to
the ON/RUN position (Do not start the engine.)
• Push and release the DOWN
arrow button to
scroll downward through the main menu to “Ve-
hicle Info”.
• Push and release the RIGHT
arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one
second to access the ”Oil Life Reset” screen.
• Push and hold the DOWN
arrow button until the
screen shows 100% oil life.
• Push and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 331
To Next Page
Loading...
