Dodge 2015 Dart - Uconnect SETTINGS; Buttons on the Faceplate

• Push and hold the DOWN arrow button to reset
the gauge and numeric display to 100% for ”Oil
Life.”
• Push and release the Up arrow button to exit the DID
screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to
the ON/RUN position (Do not start the engine.)
• Push and release the DOWN
arrow button to
scroll downward through the main menu to “Ve-
hicle Info”.
• Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button for one
second to access the ”Oil Life Reset” screen.
• Push and hold the DOWN arrow button to reset
the gauge and numeric display to 100% for ”Oil
Life.”
• Push and release the Up arrow button to exit the DID
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Uconnect® SETTINGS
The Uconnect® system uses a combination of buttons on
the touchscreen and buttons on the faceplate that allows
you to access and change the customer programmable
features.
Buttons On The Faceplate
Buttons on the faceplate are located below the Uconnect®
system in the center of the instrument panel. In addition,
4
UNDERSTANDING YOUR INSTRUMENT PANEL 351
Information Provided by: