To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Once the profile has been recalled, push and release the SET (S) button on the
memory switch.
4. Within five seconds, push and release button (1) or (2) accordingly. “Memory Profile
Set” (1 or 2) will display in the instrument cluster.
5. Push and release the LOCK button on the RKE transmitter within 10 seconds.
NOTE:
To recall the saved positions, push 1 or 2 on the memory switch or push UNLOCK on the
programmed RKE transmitter.
Easy Entry/Exit Feature
The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver
seat positioning to enhance driver mobility when entering and exiting the vehicle.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory .
To enable (or later disable) this feature you must select “Easy Exit Seats” in “Engine Off
Options” through the programmable features in the Uconnect
®
system.
• Refer to “Uconnect
®
Customer Programmable Features” in “Electronics” of this User
Guide.
• For further details refer to “Uconnect
®
Settings” in “Understanding Y our Instrument
Panel” in the Owner's Manual on the DVD.
GETTING STARTED
29
To Next Page
Loading...
