NOTE:
To access help, push the Uconnect
®
Phone button on the steering wheel and say
"help." Press the display or press either the Phone
or VR button and say
"cancel" to cancel the help session.
Incoming Text Messages
After pairing your Uconnect
®
system with a Bluetooth
®
enabled mobile device with the
Message Access Profile (MAP), the Uconnect
®
system can announce a new incoming text
message and read it to you over the vehicle’s audio system.
NOTE:
Only incoming text messages received during the current ignition cycle can be viewed/read.
To enable incoming text messaging:
iPhone®
1. Press the settings button on the mobile phone.
2. Select Bluetooth
®
.
• Ensure Bluetooth is enabled, and the mobile phone is paired to the Uconnect
®
system.
3. Select
located under DEVICES next to Uconnect.
4. Turn “Show Notifications” to On.
Enable iPhone® Incoming Text Messages
ELECTRONICS
87
To Next Page