Here’s How:
• Push the Uconnect
®
Phone button and wait for the beep, then say “reply.”
Uconnect
®
will give the following prompt: “Please say the message you would like to
send.” W ait for the beep and say one of the pre-defined messages. (If you are not sure,
you can say “help” at any time). Uconnect
®
will then read the pre-defined messages
allowed. As soon as you hear the message you would like to send, you can interrupt the
list of prompts by pushing the Uconnect
®
Phone button and saying the phrase.
Uconnect
®
will confirm the message by reading it back to you. Push the Phone button
and say “Send.”
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in Traffic. See you later.
No. Start without me. I’ll be Late.
Okay. Where are you?
I will be <5, 10, 15,...etc.>
minutes late.
Call me. Are you there yet?
I’ll call you later . I need directions.
See you in <5, 10,
15,...etc.> of minutes.
I’m on my way.
Can’t talk right now .
I’m lost. Thanks.
W ant to dictate a personal message?
• You must first register with Uconnect
®
Access (U.S. residents only) to take advantage
of a new , cloud-based V oice Texting service, an enhancement to Voice Text Reply
(Uconnect
®
8.4AN system ONLY).
Helpful Tips And Common Questions To Improve Bluetooth® Performance With
Your Uconnect® System
Mobile Phone won’t reconnect to system after pairing:
• Set mobile phone to auto-connect or trusted device in mobile phone Bluetooth
®
settings (Blackberry devices).
• Perform a factory reset on your mobile phone. Refer to your mobile phone manufacturer
or cellular provider for instructions.
• Many mobile phones do not automatically reconnect after being restarted (hard
reboot). Your mobile phone can still be connected manually. Close all applications that
may be operating (refer to mobile phone manufacturer’ s instructions), and follow
“Pairing (Wirelessly Connecting) Y our Mobile Phone To The Uconnect
®
System”.
Mobile Phone won’t pair to system:
• Perform a hard reset in the mobile phone by removing the battery (if removable — see
your mobile phone’s owner manual).
• Delete pairing history in mobile phone and Uconnect system; usually found in phone’ s
Bluetooth
®
connection settings.
• V erify you are selecting “Uconnect” in the discovered Bluetooth
®
devices on your
mobile phone.
• If your vehicle system generates a pin code the default is 0000.
ELECTRONICS
89
To Next Page