Dodge B-I-B 1948 - LICENSE DATA; BREAK-IN SPEEDS

LICENSE DATA
TRUCK SERIAL NUMBER . ....
. Stamped on serial number
plate on left door hinge post.
ENGINE SERIAL NUMBER .. ....... Stamped on left side of cylin-
der block between No. 1 and
No. 2 cylinders.
CYLINDER BORE ... . . ..... . ...... 3'A in.
STROKE .... .... . ..... . .. . . . . . . . 43fa in .
NUMBER
OF CYLINDERS .
.. . . . . 6
A.M.A. HORSEPOWER RATING .... 25.35
PISTON DISPLACEMENT .. . . ..... . 217.76 cu. in .
•
KEY NUMBER
The key or lock number is stamped only on the tag attached to
the lock keys. For theft protection, record this number and destroy
the tag. Your Dodge dealer also has a record of this number •
•
BREAK-IN SPEEDS
Until your truck has covered its first 500 miles, it is advisable not
to drive in excess of 35 r:niles per hour. During the succeeding 2000
miles of operation, the speed may be gradually increased to com-
plete the "break-in" process. Do not drive at continued high speeds
during the
first 2500 miles. If the best economy in operation and
maintenance
is to be obtained, the maximum gross weight recom-
mended should not be exceeded.
0-' 1900
LITHO . IN u. s. A