Qi Adapter (dot side down) on the charging
surface and then place your built-in charging
capable phone face up on top of the Qi Adapter .
This product may not be compatible with all
vehicle/Open Dots compatible wire-free phone
charging surface combinations.
CAUTION!
The key fob should not be placed on the
charging pad or within 15 cm (150 mm) of it.
Doing so can cause excessive heat buildup
and damage to the fob. Placing the fob in
close proximity of the charging pad blocks
the fob from being detected by the vehicle
and prevents the vehicle from starting.
51
To Next Page
Loading...
