MULTIMEDIA 341
CUSTOMER PROGRAMMABLE FEATURES
— U
CONNECT 4C/4C NAV S ETTINGS
Uconnect 4C/4C NAV With 8.4-inch Display Buttons
On The Touchscreen And Buttons On The Faceplate
Press the Apps button, then press the
Settings button on the touchscreen to
display the menu setting screen. In this mode,
the Uconnect system allows you to access
programmable features that may be equipped
such as Language, Display, Units, Voice, Clock,
Camera, Safety & Driving Assistance, Mirrors &
Wipers, Lights, Doors & Locks, Seats & Comfort,
Key Off Options, Audio, Phone/Bluetooth®
Settings, SiriusXM® Setup (if equipped), Reset,
and System Information.
NOTE:
Depending on the vehicle’s options, feature
settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting “option” until a
check-mark appears next to the setting,
showing that setting has been selected. Once
the setting is complete, press the X button on
the touchscreen to close out of the settings
screen. Pressing the Up or Down Arrow button
on the right side of the screen will allow you to
toggle up or down through the available
settings.
The following tables list the settings that may be
found within the Uconnect 4C/4C NAV radio,
along with the selectable options pertaining to
each setting.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
9
20_LA_OM_EN_USC_t.book Page 341
To Next Page
Loading...
