The Valet Mode Deactivation key pad will then prompt
you for your 4 digit PIN code. Enter your PIN code, and
press the “OK” button on the touchscreen. Your vehicle
will return to the default state whenever exiting Valet
Mode.
NOTE: If your 4 digit PIN is lost or forgotten, the vehicle
will exit Valet Mode after a battery disconnect for approxi-
mately five minutes. Reconnect the battery and cycle the
ignition to the RUN position; the vehicle will be in Default
Mode.
ECO MODE — IF EQUIPPED WITH AUTOMATIC
TRANSMISSION
Valet Mode Deactivation PIN
ECO Mode
4
UNDERSTANDING YOUR INSTRUMENT PANEL 263
To Next Page
Loading...
