Dodge Charger 2012 Specifications

1 / DODGE CHARGER SPECIFICATIONS http://media.chrysler.com
SPECIFICATIONS
CHARGER
2012 Dodge Charger
SPECIFICATIONS
Dimensions are in inches (millimeters) unless otherwise noted.
GENERAL INFORMATION
Body Style
E-segment Sedan
Assembly Plant
Brampton Assembly Plant, Ontario, Canada
EPA Vehicle Class
Large car
Introduction Date
December 2010 as 2011 model
ENGINE: 3.6-LITER PENTASTAR DOHC 24-VALVE V-6
Availability
Standard — Dodge Charger SE (RWD), SXT and SXT Plus (RWD/AWD)
Type and Description
60-degree V-type, liquid-cooled
Displacement
220 cu. in. (3604 cu. cm)
Bore x Stroke
3.78 x 3.27 in. (96.0 x 83.0 mm)
Valve System
Chain-driven DOHC, 24 valves, hydraulic end-pivot roller rockers
Fuel Injection
Sequential, multi-port, electronic, returnless
Construction
Aluminum deep-skirt block with aluminum-alloy heads
Compression Ratio
10.2:1
Power (SAE net)
292 bhp (218 kW) @ 6,350 rpm (81.1 bhp/L)
Torque (SAE net)
260 lb.-ft. (353 N•m) @ 4,800 rpm
Max. Engine Speed
6,400 rpm (electronically limited)
Fuel Requirement
Unleaded regular, 87 octane (R+M)/2; and E-85 (Federal Bin 5, 37 state
compliant)
Oil Capacity
6 qt. (5.7L) with dry filter
Coolant Capacity
14.0 qt. (13.25L)
Emission Controls
Dual three-way catalytic converters, heated oxygen sensors
and internal engine features
(a)
Max. Gross Trailer Weight
1,000 lbs. (454 kg)
EPA Fuel Economy mpg (City/Hwy)
18/27 (RWD with WA580 5-speed automatic transmission)
19/31 (RWD with ZF 8HP45 eight-speed automatic transmission)
18/27 (AWD with ZF 8HP45 eight-speed automatic transmission)
Engine Assembly Plant
Trenton South Engine Plant, Trenton, MI
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.

Dodge Charger 2012 Specifications

General

Brand	Dodge
Model	Charger 2012
Category	Automobile
Language	English