15. BACK — Press to exit out of menus or return to
source selection screen.
16. 䉲 — Press to navigate menus.
17. OK — Press to select the highlighted option in a
menu.
18. 䉳 — Press to navigate menus.
19. 䉱 — Press to navigate menus.
Replacing The Remote Control Batteries
The remote control requires two AAA batteries for op-
eration. To replace the batteries:
• Locate the battery compartment on the back of the
remote, then slide the battery cover downward.
• Replace the batteries, making sure to orient them
according to the polarity diagram shown.
• Replace the battery compartment cover.
Headphones Operation
The headphones receive two separate channels of audio
using an infrared transmitter from the video screen.
If no audio is heard after increasing the volume control,
verify that the screen is turned on, the channel is not
muted and the headphone channel selector switch is on
the desired channel. If audio is still not heard, check that
fully charged batteries are installed in the headphones.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 369
To Next Page
Loading...
