NOTE:
If the vehicle is unlocked then the liftgate will open
with the handle and no RKE Transmitter is required.
To Lock The Liftgate
With a valid Passive Entry RKE transmitter within 3 ft
(1.0 m) of the liftgate, press the passive entry lock button
located to the right of electronic liftgate handle.
NOTE: If “Unlock All Doors 1st Press” is programmed in
Uconnect® Settings, all doors will unlock when you press
the button on the liftgate. If ⬙Unlock Driver Door 1st
Press⬙ is programmed in Uconnect® Settings, the liftgate
will unlock when you press the button on the liftgate For
further information, refer to “Uconnect® Settings” in
“Understanding Your Instrument Panel”.
Passive Entry/Lock Button Location
1 — Electronic Release Switch 2 — Lock Button Location
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39
To Next Page
Loading...
