Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually .
When the vehicle is new , the compass may appear erratic and the DID will display “CAL”
until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an
area free from large metal or metallic objects) until the “CAL” message displayed in the
DID turns off. The compass will now function normally .
ECO
The ECO message will appear in your DID display when the Fuel Saver Technology is active
and you are driving in a fuel efficient manner .
This feature allows you to monitor when you are driving in a fuel efficient manner , and it
can be used to modify driving habits in order to increase fuel economy.
DID Main Menu Selectable Items
The DID can be used to view the following main menu items:
• Speedometer • Stop/Start Info — If Equipped
• Vehicle Info • Audio
• Driver Assist • Messages
• Fuel Economy • Screen Setup
• Trip Info
Refer to “Driver Information Display (DID)” in “Understanding Y our Instrument Panel” in
the Owner's Manual on the DVD for further information.
DID Screen Setup
The following settings allow you to change what information is displayed in the instrument
cluster as well as the location that information is displayed:
• None • Average MPH (L/100km)
• Compass • Current MPH (L/100km)
• Outside Temperature • Trip A (Distance Only)
• Time • Trip B (Distance Only)
• Range to Empty
ELECTRONICS
148
To Next Page
Loading...
