Medium
The default status of FCW is the “Medium” setting and the Active Braking is in the “On”
setting. This allows the system to warn the driver of a possible collision with the vehicle in
front using audible/visual warnings and it applies autonomous braking.
Near
Changing the FCW status to the “Near” setting, allows the system to warn you of a
potential frontal collision when you are much closer.
This setting provides less reaction time than the “Far” setting, which allows for a more
dynamic driving experience.
More dynamic or aggressive drivers that want to avoid frequent warnings may prefer this
setting.
NOTE:
Changing the Active Braking status to “Off” prevents the system from providing autono-
mous braking, or additional brake support if the driver is not braking adequately in the
event of a potential frontal collision. Active braking can be turned “Off” in the Uconnect
controls settings.
Refer to the Owner's Manual on the DVD for further details.
WARNING!
Forward Collision W arning (FCW) is not intended to avoid a collision on its own, nor can
FCW detect every type of potential collision. The driver has the responsibility to avoid
a collision by controlling the vehicle via braking and steering. Failure to follow this
warning could lead to serious injury or death.
AUTOMATIC DIMMING MIRRORS
The rearview and driver side exterior mirror automatically adjusts for headlight glare from
vehicles behind you.
You can turn the feature on or off when the Automatic Dimming Mirror feature is selected
through the programmable features in the Uconnect system. Refer to “Uconnect Set-
tings” in “Understanding Y our Instrument Panel” in the Owner's Manual on the DVD for
further details.
ELECTRONIC SHIFTER
Your vehicle is equipped with a fuel efficient eight-speed transmission. The Electronic
gear selector is located on the center console. The transmission gear (PRND) is displayed
both above the shifter control and in the Driver Information Display (DID).
OPERATING YOUR VEHICLE
58
To Next Page
Loading...
