Lock Or Unlock The Liftgate
To Lock The Liftgate — With a Remote
Keyless Entry (RKE) transmitter within 3 ft
(1.0 m) of the liftgate, push the passive
entry lock button located to the right of
electronic liftgate handle.
To Unlock/Enter The Liftgate — The liftgate
passive entry unlock feature is built into the
electronic liftgate handle. With a Remote
Keyless Entry (RKE) transmitter within 3 ft
(1.0 m) of the liftgate, push the electronic
release switch to open the liftgate.
NOTE:
Refer to page 150 for “Uconnect Customer
Programmable Features” in this guide or
the Owner's Manual on the DVD for further
information.
Engine Starting/Stopping
Starting
Perform the following starting procedure
with a Remote Keyless Entry (RKE) trans-
mitter inside the vehicle:
1. While pushing the brake pedal, push the
ENGINE START/STOP button once. If
the engine fails to start, the starter will
disengage automatically after 10 sec-
onds.
2. To stop the cranking of the engine prior
to the engine starting, push the button
again.
Stopping
1. Bring the vehicle to a complete stop.
2. Shift the Transmission to P ARK (P).
3. Push the ENGINE START/STOP button once. The ignition switch will return to the OFF
position.
Electronic Liftgate Handle
1 — Electronic Release Switch
2 — Lock Button Location
Engine START/STOP Button
GETTING STARTED
14
To Next Page
Loading...
