To Lock The Liftgate
With a valid Passive Entry RKE Key Fob within 3 ft (1.0
m) of the liftgate, push the passive entry lock button
located to the right of electronic liftgate handle.
NOTE: If “Unlock All Doors 1st Press” is programmed in
Uconnect Settings, all doors will unlock when you push
the button on the liftgate. If ⬙Unlock Driver Door 1st
Press⬙ is programmed in Uconnect Settings, the liftgate
will unlock when you push the button on the liftgate. For
further information, refer to “Uconnect Settings” in “Un-
derstanding Your Instrument Panel.”
To Lock The Vehicle’s Doors
With one of the vehicle’s Passive Entry RKE Key Fob
within 5 ft (1.5 m) of the driver or passenger front door
handle, push the door handle LOCK button to lock all
four doors and liftgate.
NOTE: This feature will cause the horn to chirp when
the doors are locked with the door handle LOCK button.
This feature can be turned on or off. To change the
current setting, refer to “Uconnect Settings” in “Under-
standing Your Instrument Panel” for further information.
Push The Door Handle Button To Lock
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
