• With a USB jump drive installed, press the “USB” button to save to the
jump drive.
• Press the “Uconnect” button to save the runs to the Owner web page.
NOTE: Uconnect option will be greyed out or missing if the vehicle does not
have a valid Uconnect account associated with it.
• Press the “Cancel” button to view the last timer “Ticket”.
The “Tickets” contain the timers listed below:
Reaction Time
• Measures the driver's reaction time for launching the vehicle against a
simulated drag strip timing light (behavior modeled after 500 Sports-
man Tree) displayed in the instrument cluster display.
NOTE: The Reaction Time, MPH (km/h), 60 FT (18 meters),1/8Mile (200
meters), and1/4Mile (400 meters) timers will be “ready” when the
vehicle is at 0 MPH (0 km/h).
0-60 MPH (0-100 km/h)
•
Displays the time it takes for the vehicle to go from 0 to 60 mph (0 to
100 km/h).
0-100 MPH (0-160 km/h)
•
Displays the time it takes for the vehicle to go from 0 to 100 mph (0 to
160 km/h).
60 FT
• Displays the time it takes for the vehicle to go 60 feet.
1 / 8 Mile (200 meter) ET
•
Displays the time it takes for the vehicle to go an 1 / 8 mile (200 meters).
1 / 8 Mile (200 meter) MPH
• Displays the vehicle speed at the time1/8mile (200 meters) was
reached.
1 / 4 Mile (400 meter) ET
• Displays the time it takes for the vehicle to go1/4mile (400 meters).
Performance Pages — Save
SRT PERFORMANCE PAGES
10
To Next Page
