VALET MODE
To enter V alet Mode press the “Valet” button on the touchscreen and a
popup screen will ask you if you would like to enter Valet Mode, after
selecting “Yes” you will be asked to enter a four digit PIN code. The PIN
code is not predetermined, so you are free to select any four digit numeric
combination that will be easy to remember .
While in Valet Mode the following vehicle configurations are set and locked
to prevent unauthorized modification:
• All-Wheel Drive is set to 50/50.
• Transmission locks out access to first gear and up-shifts earlier than
normal.
• Stability Control, Steering, and Suspension are set to their STREET
settings.
• Steering wheel paddle shifters are disabled.
• The Drive Mode interface is not available. Pushing the SRT button on the
console will display the unlock keypad.
• The ESC Off button is disabled.
• The Launch Control button is disabled.
• Engine limited to a lowest power output state.
Valet Mode Activation
SRT DRIVE MODES
31
To Next Page
Loading...
