•
After the four-digit password is entered, press the
remote control’s ENTER button to accept the change.
To set the rating, activate the DVD Setup Menu and
follow these additional instructions:
•
Using the remote control’s Left and Right cursor
buttons, select the Rating tab.
•
Highlight ⬙Change Rating⬙, and then press the remote
control’s ENTER button.
•
Enter the current password. Select a digit, use the
remote control’s Up and Down cursor buttons to set
the value for the current digit, and then press the
remote control’s Right cursor button to select the next
digit. Repeat this digit selection sequence for all four
digits.
•
After the four-digit password is entered, press the
remote control’s ENTER button. If the password is
correct, the Rating Level menu is displayed.
DVD Player Level Menu
404 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
