Cavity Cartridge
Fuse
Mini
Fuse
Description
M37 10 Amp
Red
Antilock Brakes/
Stability Control
System Module/
Stoplamp Switch
Sensor
M38 25 Amp
Natural
All Door
Lock &Unlock
CAUTION!
•
When installing the totally integrated power mod-
ule cover, it is important to ensure the cover is
properly positioned and fully latched. Failure to
do so may allow water to get into the totally
integrated power module and possibly result in a
electrical system failure.
(Continued)
CAUTION! (Continued)
•
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
VEHICLE STORAGE
If you are leaving your vehicle dormant for more than
21 days you may want to take steps to protect your
battery. You may:
•
Remove fuse #J13 in the Totally Integrated Power
Module (TIPM) labeled Main Ignition Off Draw (IOD).
•
Or, disconnect the negative cable from the battery.
7
MAINTAINING YOUR VEHICLE 625
To Next Page
Loading...
