The system allows the driver to select information by
pressing the following buttons mounted on the steering
wheel:
MENU Button
Press and release the MENU button and the
mode displayed will change between Trip
Functions, Uconnect™ gps (if equipped), Sys-
tem Status, and Personal Settings.
Press the FUNCTION SELECT button to accept
a selection. Also, the FUNCTION SELECT but-
ton changes the current CD track being played
(if equipped) when the EVIC is in the
Compass/Temp/Audio screen.
Press the SCROLL button to scroll through
Navigation (if equipped), System Status Mes-
sages, and Personal Settings (Customer-
Programmable Features).
Press and release the COMPASS/
TEMPERATURE button to display one of eight
compass readings and the outside temperature.
Electronic Vehicle Information Center (EVIC)
Displays
When the appropriate conditions exist, the EVIC displays
the following messages.
•
Turn signal on (with a continuous warning chime)
•
Left front turn signal light out (with a single chime)
•
Left rear turn signal light out (with a single chime)
•
Right front turn signal light out (with a single chime)
•
Right rear turn signal light out (with a single chime)
•
RKE Battery Low (with a single chime)
•
Personal settings not available – vehicle not in PARK
218 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
