DESCRIPTION FIGURE
SUNROOF 1
PLENUM ASSEMBLY 2
FLOOR PAN/DASH/PLENUM 3
REAR FLOOR COMPLETE 4
UNDERBODY COMPLETE (1 OF 3) 5
UNDERBODY COMPLETE (2 OF 3) 6
UNDERBODY COMPLETE (3 OF 3) 7
OUTER BODY SIDE APERTURE 8
BODY SIDE APERTURE COMPLETE 9
BODY IN WHITE WITHOUT ROOF (1 OF 2) 10
BODY IN WHITE WITHOUT ROOF (2 OF 2) 11
BODY IN WHITE COMPLETE 12
NOTE: Structural Adhesives used are a high strength epoxy and a high expansion lower strength antiflutter
material. High strength epoxy is used on all areas.
STRUCTURAL ADHESIVE LOCATION INDEX
Back to Index
To Next Page
Loading...
