Picture shows pre-production model.
CODE XFM
172
RPM GOVERNOR, PRESET
POWERTRAIN
Preset
rpm governor
(Preset idle
control)
Details and Technology
This electronic rpm governor maintains a constant rpm, e.g., for auxiliary belt drive operation. Under load
change, rpm may fluctuate by approximately +/– 50 rpm (depending on engine, load and rpm). The rpm
setting can be programmed using the Star diagnosis system.
Benefits and Arguments
• Constant rpm
Necessary if a virtually constant rpm must be maintained in order to operate an auxiliary unit.
Remarks
Not suitable for operating 220-volt generators.
To Next Page
Loading...
