Tach. Peak Hold
When enabled, the Tach. Peak Hold function marks the
peak Revolutions Per Minute (RPM) on the tachometer
gauge for 3 seconds when the RPM is above 4000. Using
the UP and DOWN arrow switches on the left side of the
steering wheel, select the gauges icon from the menu on
the left side of the cluster (highlighted red is the active
menu item). Use the RIGHT arrow to enter the gauges
setup screen and the UP/DOWN arrows to select Tach
Peak from the menu of gauge options.
Select up and down to toggle between “ON” and “OFF.”
Tach. Peak Hold
184 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
