DOEPFER A-100 - Page 32

8. Module Overview System A - 100
doepfer
26
Module Width Curr. Curr.@5V Description
A-143-2
26 70 -
Quad ADSR
Four ADSR envelope generators with EOA/EOD/EOR gate outputs and retrigger feature
A-143-3
14 70 -
Quad LFO
Four LFO modulation oscillators with triangle, rectangle and saw outputs, range switch
A-143-4
22 100 -
Quad VCLFO / VCO
Four VC oscillators with triangle and rectangle, range switch LFO/VCO, reset, direction
A-143-9
830 -
Quadrature LFO/VCO
voltage controlled LFO/VCO, four sine outputs with 90 degrees phase shift between e.a.
A-144
830 -
Morphing Controller
control voltage modifier to obtain morphing effects in combination with A-135
A-145
830 -
LFO 1
modulation oscillator with 5 waveforms
A-146
820 -
LFO 2
modulation oscillator with 2 waveforms and waveshape control
A-147
840 -
VCLFO
voltage controlled modulation oscillator with 4 waveforms
A-148
420 -
Dual S&H
two independent sample & hold devices
A-149-1
12 40 -
Quantized/Stored Random Voltages
Replica of the legendary Buchla module "Source of Uncertainty" (part 1)
A-149-2
440 -
Digital Random Voltages
expansion module for A-149-1, generates 8 digital random voltages/gates (high/low)
A-150
430 -
Dual VCS - Voltage Controlled Switsches
two independent voltage controlled switches
A-151
420 -
Quad Sequential Switch
electronical "rotary switch" with 4 positions
A-152
16 40 -
Voltage Addressed Switch
electronical 8-fold "rotary switch" with voltage controlled addressing