DOEPFER A-100 - Page 33

doepfer
System A - 100 8. Module overview
27
Module Width Curr. Curr.@5V Description
A-154
22 60 -
Enhanced Sequencer Controller
Expansion module for A-155, adds additional running modes and features to A-155
A-155
50 100 -
Analog / Trigger Sequencer
8 step analog and trigger sequencer
A-156
850 -
Dual Quantizer
two control voltage quantizers with special selection features
A-157
?? -
Trigger Sequencer
(still under development)
8x16 trigger matrix, 8 trigger outputs
A-160-1
440 -
Clock Divider
frequency divider for clock/gate signals
A-160-2
4? -
Clock Divider II
(still under development)
3 different sets of dividing factors (power of 2/integer/prime numbers), gate/trigger mode
A-160-5
4? -
Clock Multiplier/Ratcheting Controller
(still under development)
voltage controlled clock multiplier, 3 sets of multiplication factors
A-161
420 -
Clock Sequencer
clock sequencer expansion for clock divider A-160
A-162
840 -
Dual Trigger Delay
two independent trigger delay devices
A-163
840 -
Voltage Controlled Divider
divides the frequency of an audio signal by an integer factor controlled from a CV
A-164
610 -
Manual Gate Module
three manually generated gate/trigger signals
A-165
420 -
Dual Trigger Modifier
two independent trigger modifiers (inverter + transition edge detector)
A-166
840 -
Logic Module
dual module with logical AND/OR/EXOR combinations + 2 logical inverters
A-167
820 -
Analog Comparator/Offset-Generator/Subtractor
compares the difference of two voltages with fixed value and generates a gate from this