21
Follow the instructions below to attach the included belt
clip to the transmitter.
1. Align the belt clip to the grooves on the back of the
transmitter.
2. With a firm grip, screw on the belt clip's Phillips head
screws with a screwdriver.
either wait until your transmitter is back in working order
before emitting a correction or while holding the Constant
button down, slowly turn the Rheostat Dial while watching
your dog’s reaction. Do not turn the Rheostat Dial rapidly,
because the receiver will emit a static correction based on
the level of the Rheostat Dial, which might not be correctly
reflected on the LCD screen.
9. Attaching the Belt Clip
Caution! Tighten until firmly in place. Be careful not to
over tighten.
To Next Page
Loading...
