Dogtra 2700T&B User Manual

E-collars are intended for behavior modification of dogs, not for human use.

Recommends against using e-collar for dogs aggressive towards others.

Filtering system ensures minimal interference with other electronic devices.

Constant button held for 12s auto-shuts down; reactivates upon release.

Information on Dogtra's auto and European chargers for accessories.

Easy-to-use, ergonomically fitted transmitter with Rheostat Dial for gradual adjustments.

Allows trainer to control two different dogs from one transmitter.

Features Nick & Constant stimulation, and High Performance Pager vibration.

Offers three beeper modes and adjustable volume with two tones.

Fully waterproof receiver/collar and transmitter with compact design.

One-charging system for transmitter and receiver(s); 2-hour rapid charge.

Over 8000 identity codes, visible blue LCD screen, battery indicator.

Diagram and labels for the 2700T&B 1-Dog Transmitter components.

Diagram and labels for the 2702T&B 2-Dog Transmitter components.

Instructions on how to turn the handheld transmitter on and off.

Procedure to turn the receiver/collar on and off using the magnetic red dot.

Explanation of Nick and Constant buttons on the transmitter.

Using the Locate and Pager buttons for dog location and vibration.

Selecting modes (Run/Point, Point-Only) and collar selection for 2-dog models.

Explanation of beeper sounds in Run/Point and Point-Only modes.

How to adjust beeper volume and select tones for different modes.

Instructions for proper collar fitting to ensure effective contact.

Guidance on adjusting stimulation levels based on dog's temperament.

Steps to introduce the dog to the beeper sound gradually.

Tips for achieving the maximum 1-mile range of the system.

Explanation of LED colors for battery life and button press feedback.

Description of the battery charger and cables for charging.

Step-by-step guide for charging the transmitter and receiver batteries.

Understanding the LCD screen for stimulation levels and battery life.

Advice for using the transmitter's LCD in cold temperatures.

Instructions for securely attaching the belt clip to the transmitter.

Guide to using the test light to check stimulation levels.

Procedures to test the beeper sound and mode operations.

Prerequisites for starting e-collar training with your dog.

Importance of leash training and reinforcing commands.

How to introduce the e-collar for reinforcing obedience commands.

Ensuring the rubber charging cap is in place and inspecting the unit.

Guidelines for storing the unit for extended periods.

Refer to the Troubleshooting Guide for unit malfunctions.

Checks for receiver power, collar fit, contact points, and intensity.

Troubleshooting when test light indicates issue but no sensation.

Addressing issues with transmitter range and potential causes.

Diagnosing problems with battery charging and the charging port.

Details on the warranty coverage, duration, and limitations.

Requirements for product registration and proof of purchase.

Items and conditions not covered by the Dogtra warranty.

Steps for sending units for repair and contact information.