Dogtra 2500 T&B Series - User Manual

The Rheostat Intensity Dial adjusts stimulation levels (0-127). The LCD screen shows the level and battery life.

The LCD screen displays stimulation level and battery life. The indicator shows battery status with bars.

When the "Nick" button is pushed, the receiver emits a single, rapid pulse of electrical stimulation.

When the "Constant" button is pushed, the receiver emits a continuous stimulation for up to 12 seconds.

Explains how to activate and deactivate the receiver using the magnetic red dot on the transmitter and receiver.

Explains how to test the 'Nick' and 'Constant' buttons using the test light and the safety shut-off feature.

Guides on testing the beeper function using the Locate button and different Mode button settings (Run/Point, Point-Only).

Details how to fit the collar firmly against the dog's skin with contact points pressing correctly for consistent electrical contact.

Provides a step-by-step guide for charging the transmitter and receiver using the charger and wall outlet.

Troubleshooting steps for when the dog is not reacting to the collar, including checking strap tightness and contact points.

Troubleshooting steps when the test light comes on but no stimulation is felt, covering tolerance and battery status.

Addresses issues with transmitter range or reduced stimulation when the dog is farther away, including antenna damage and environmental factors.

Troubleshooting steps for collars not holding a charge, including cleaning the charging port and battery replacement.

Details the two-year limited warranty, coverage, voiding conditions, and required documentation for warranty claims.