Dogtra 2502 T&B Two-Dog - User Manual

Description of the Rheostat Intensity Dial for adjusting stimulation levels and battery life.

Explanation of the LCD screen's display for stimulation level and battery life indicator.

Describes the function of the Nick button, which emits a single, rapid pulse of stimulation.

Explains the Constant button, which provides continuous stimulation up to 12 seconds.

Instructions for turning the transmitter on and off using the dedicated ON/OFF button.

Procedure for activating and deactivating the collar/receiver using the magnetic red dot.

Steps for testing transmitter activation, battery status, and test light response to Nick/Constant buttons.

Procedure to test the Locate button and cycle through the Mode button for beeper functions.

Instructions on fitting the collar for firm contact point pressure against the dog's skin to ensure proper function.

Notes that the unit uses Lithium-Polymer batteries and requires an initial full charge.

Step-by-step instructions for charging the transmitter and receiver using the provided charger.

Troubleshooting steps for when the dog does not respond to the collar's stimulation.

Steps to take if the test light activates but no stimulation is felt by the user.

Troubleshooting steps for collars that are not retaining battery charge, including cleaning and battery replacement.

Details the two-year limited warranty, coverage, and required documentation for repairs.