26
12. Code Setting Guide
Before coding the transmitter,
determine how you would like
to use the transmitter.
1) Use as 1-dog system or
2-dog system
2) Which side, between Front
or Left, you want for ‘Dog 1’
Please note that if you want
to add an expandable second
receiver, you must use the
‘2-Dog Set Up’ instructions.
Front
side
Left
side
Setting Mode
Stimulation Level Lock
Setting Mode
Make sure the transmitter is
o. Hold the on/o button
on the transmitter until there
is a rapid green LED light on
the transmitter and the OLED
screen shows "Setting Mode "
The transmitter is now in "Setting Mode." Proceed to the dog
set up you desire.
Make sure the toggle switch
is in the "Unlocked" position.
To Next Page
Loading...
