Need help?Do you have a question about the Dogtra iQ VIBE and is the answer not in the manual?
Crucial safety instructions and warnings for users and dogs to prevent injury or damage.
Guidance on training methods, aggressive dogs, children's supervision, and product misuse.
Information on electrical safety, medical device interference, and inadvertent activation risks.
Details on unauthorized use, humane training, and battery handling and disposal.
Ensuring the charging cap is secure and inspecting the unit for damage after each use.
Guidelines for storing the unit, including charging before storage and maintaining room temperature.
Instructions on referring to the troubleshooting guide before contacting Dogtra for service.
Answers common questions about charging, maintenance, and troubleshooting charging issues.
Troubleshooting steps for when the dog does not respond to the iQ VIBE system.
Details on the one-year warranty, conditions, and exclusions for Dogtra products.
Dogtra's sole warranty statement and limitations on other representations or warranties.
Disclaimer of all other warranties, express or implied, and limitations of remedies.
Explanation of how legal rights may differ based on state or jurisdiction.
Recommendation to register products for future warranty service and updates.
The Dogtra iQ VIBE is an ultra-compact, fully waterproof no-bark collar designed for dogs as small as 10 pounds. Its primary function is to deter excessive barking through a 3-level High Performance Pager (HPP) vibration system. The device is equipped with a Sound Recognition Sensor that detects barking and triggers the vibration correction.
The iQ VIBE operates by detecting a dog's bark through its integrated Sound Recognition Sensor. Once a bark is detected, the collar delivers a High Performance Pager (HPP) vibration as a deterrent. The system offers three distinct vibration levels, allowing owners to adjust the intensity based on their dog's temperament and sensitivity. This adjustability is crucial for effective training, as starting with the lowest level and gradually increasing it helps prevent the dog from becoming accustomed to the vibration, thus maintaining the system's effectiveness.
A key safety feature of the iQ VIBE is its preset 4-second delay between vibrations, even if the dog barks continuously. This delay is intentionally designed to give the dog time to process the correction and understand the implication of its barking behavior. This thoughtful design aims to facilitate learning rather than simply punishing the dog.
The collar also incorporates a "Sleep Mode" to conserve battery life and prevent unnecessary corrections. If no barking is detected for 12 seconds or more, the system automatically enters sleep mode, during which the LED indicator will not illuminate. The system reactivates instantly, and the LED light turns back on, as soon as the dog barks again.
To operate the iQ VIBE, users first need to turn it on by pressing the on/off button on the receiver until the LED illuminates green. To turn it off, the button should be pressed for 2 seconds until the LED illuminates red.
Before initial use, or if the device's functionality is in question, a simple testing procedure can be performed. With the iQ VIBE turned off, hold the on/off button for 4 seconds until the green LED blinks rapidly. Release the button, then blow into the Mic Sensor. If the device is operating correctly, the receiver will emit a High Performance Pager (HPP) vibration three times.
Adjusting the vibration intensity is straightforward. With the iQ VIBE turned on, a brief press of the on/off button will cycle through the three HPP vibration levels. The last selected level is automatically saved when the device is turned off. This allows for consistent training without needing to reset the level each time the collar is used.
Proper fitting of the receiver is paramount for the iQ VIBE's effectiveness. The receiver should be fitted snugly against the dog's neck to ensure consistent contact for proper vibration delivery. Users should be able to fit two fingers underneath the collar strap. The ideal placement is on either side of the dog's windpipe. An improper, loose fit can cause the receiver to move around, leading to skin irritation and inconsistent corrections, thereby reducing the system's efficacy.
It is important to note that leaving the receiver in the same location on the dog's neck for extended periods can cause skin irritation due to sensitivity. For dogs wearing the receiver for long durations, it is recommended to reposition the receiver every few hours to a different spot on the neck and to remove the receiver entirely after eight hours of usage. Regular checks for skin irritation are advised each time the unit is used.
The iQ VIBE features an LED indicator that provides crucial information about the device's status. When a vibration occurs, the LED lights up. The LED also indicates battery life: green signifies a full charge, amber indicates a medium charge, and red means the battery needs charging. In standby mode, the LED blinks every 4 seconds, and the number of flashes corresponds to the selected HPP vibration level: one blink for low, two for medium, and three for high.
The Dogtra iQ VIBE is powered by a lithium polymer battery, designed for a 2-hour rapid charge. When the indicator light turns red or does not come on, it signals that the unit requires recharging.
For charging, it is crucial to use only Dogtra-approved batteries, chargers, and accessories to prevent damage. The unit comes with a partial charge from the factory, but a full 2-hour initial charge is recommended before the first use, away from any flammable substances. The charger should be plugged into the receiver, then into a 120-volt wall outlet or a cigarette lighter if using an auto charger. All indicator lights will glow red during charging and turn green once fully charged. Once charging is complete, the battery charging receptacle should be covered with its rubber plug to maintain the unit's waterproof integrity. If the unit is to be stored without use for three months or more, the batteries should be fully charged, and the charger should be disconnected from the power source when not in use.
Basic maintenance involves ensuring the rubber charging cap is securely in place whenever the receiver is in use. After each training session, a careful inspection of the unit for any missing parts or damage to the casing is recommended. Damage to the casing can compromise the unit's waterproof guarantee. After confirming no damage, the receiver should be rinsed and cleaned of any dirt or debris.
For storage maintenance, the iQ VIBE should be fully charged before being stored for extended periods. During storage, it is advised to give the unit a full charge once a month and again before its next use. The units should be stored at room temperature and not exposed to extreme climates, which could affect battery life and overall performance.
General| Vibration Only | Yes |
|---|---|
| Vibration Levels | 100 |
| Waterproof | Yes |
| Battery Life | 40-60 hours |
| Charging Time | 2 hours |
| Stimulation Levels | 0 |
| Battery | Lithium Polymer |
| Dog Size | 10 lbs and up |
To Next Page
