Need help?Do you have a question about the Doherty SCR01/WHITE and is the answer not in the manual?
Compatible with Doherty epoxy coated frame (purchased separately).
Read instructions carefully before assembling the new screen system.
Approximate assembly time for the screen is 45 minutes.
Lists the components included in the screen system.
Verify components are present, lay frame flat, remove wires, insert caps.
Snap mount clips onto the frame in specified positions.
Fasten panels to the frame using clips, screws, and washers, ensuring correct orientation.
Slide remaining clips and repeat screw fastening for each.
Adjust panel/clips to centralize the panel within the frame.
Repeat assembly stages for remaining panels with specific orientation.
Adjust top screws if panels appear bowed to flatten them.
Rotate castor tubes to the correct position and tighten nuts.
Screen is fully assembled. Lift carefully onto castors.
Wipe surfaces with mild detergent, rinse, and dry thoroughly.
Avoid concentrated bleach or abrasive cloths to prevent damage.
Check for loose parts and ensure castors are clean and free running.
Provides product codes for replacement parts like panels and clips.
Product guaranteed free from defects for 1 year from purchase.
Contact supplier for repair, replacement, or refund for defects.
Lists exclusions like misuse, accident, and prohibited repairs.
User rights, liability disclaimers, and CE marking compliance.
General| Category | Medical Equipment |
|---|---|
| Model | SCR01/WHITE |
| Material | Non-woven fabric |
| Color | White |
| Size | Universal |
| Disposable | Yes |
| Sterility | Non-sterile |
To Next Page