EasyManua.ls Logo

Dok CR08 - Use the unit; Clock and Sleep Timer; Listen to the Radio

Dok CR08
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use the unit
10
Clock and Sleep Timer
Setting the Clock
1. If in standby mode,press and hold the CLOCK/PRESET to
adjust mode.
2. When the display begins to blink,then release the button.
3. Press the TUNER-/TIME-&TUNER+/TIME+ button to adjust
the hour.
The PM indicator will light up when the hour is set in the PM.
4. Press the CLOCK/PRESET button to adjust the hour.(do the
same to adjust minute).
5. Press the CLOCK/PRESET button to finish setting the time.
Setting the Sleep Timer
1. Press the Snooze/Sleep button repeatedly to set the sleep
timer(90,80,70,60,50,40,30,20,10 min or OFF).
2. Once the set sleep time has expired the clock radio will
automatically power off.
Listen to the Radio
Tuning the FM Radio
1. Press POWER button to turn the clock radio on.
2. Press the TUNER+ and TUNER- buttons to adjust the radio to
the desired frequency.
3. Press and hold TUNER+ and TUNER- buttons to search for the
next available frequency.
4. Press the VOL+/VOL- buttons to adjust the volume.
Saving a Station as a Preset
1. Follow the instructions for Tuning Radio.
2. Tune to the desired station.
3. Press and hold the CLOCK/PRESET button until P01 blinks,
Press CLOCK/PRESET again to lock the current station to the
P01;
4. Repeat 2 and 3 to save more stations in preset P02, P03, P04
…up to P020.